Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

11.06.2025 15:07

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

This is 'the assistant's answer'

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

An AC voltage/ current source, and an ac inductive load.

Paris Erupts in Celebrations, Riots After PSG Wins Champions League - WSJ

2024–10–10[John johnson John Johnson ]

A fuse is a non-resetable over current circuit protector.

So, the voltage could go up to 500 volts, and the fuse will not open up.

Why do people hate fat people so much, even people who aren't exactly supermodels themselves? It seems like such a deep, passionate hatred, like they're offended by fat people just existing. Fat people didn't do anything to them, so why hate them?

At one ohm, the resistor has a maximum of 1 watt power.

But it can get overloaded, and no longer works.

It seems Mohan does not understand the difference between a comment and an Answer.

What the ‘Revenge Tax’ Is in the Tax Bill—and How It Could Pummel the Dollar - Barron's

This one hit behind the barn.

He then describes the function of a fuse.

But… the neutral is now “floating” because of the 1 ohm resistance.

How do schizophrenia symptoms change throughout the day?

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

[image of Common-mode choke]

Can you write a poem or short story based on the first image that shows up on Pinterest?

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

what exactly is a ‘surge’ protector?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Supercomputer simulation reveals how merging neutron stars form black holes and powerful jets - Phys.org

He then describes Rainy Season and Lightning.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Homesellers now outnumber buyers by half a million: Redfin - NewsNation

These devices are installed between the “hot” and “neutral” and protective ground.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

nine

New Research Reveals That Humans Are Seasonal Animals - SciTechDaily

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

The bolt then partially travels down the line to your home.

Defiant Tusk to call confidence vote to reassert his authority in Poland after election setback - politico.eu

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

There are two important concepts here.

but I think this circuit , shows a few more pieces.

Riddle: How do budget cuts, DEI hires, and empty reservoirs, turn the bluest, most Democrat city Red?

2024–10–16 [ OO OLAOYE OYEBODE ]

At least they know the answer if they wanted it.

In schematic diagrams this is the symbol for a fuse:

Tom Aspinall wishes Jon Jones well in retirement, declares himself ‘undisputed’ UFC champion - MMA Fighting

This is where this question deviates from being a 'generic' question, and becomes more specific.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

There are three different concepts here that are getting confused.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

I post the exact comment here.

For this case there are devices called Metal oxide varistors (MOV).

2024–10–14 [Omar Gharbi Omar Gharbi ]

eight

so, what happens?

Because the load is inductive, the current lags the voltage.(by a bit).

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

This device then solves the entire problem.

but this device (an Inductor) … impedes the rapid changes in the current.

He then asserts :

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

a photo is worth a thousand words.

A circuit breaker is similar, but is resettable.

First Sentence:

This is the picture of an electronic coil of wire wound around a core of magnetic material.

It also is a device that limits the change in current flow.

The other is “what does a “fuse” do?”

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Now when you have a certain ac resistance, then a current flows in a loop.

One

the problem then depends on "how fast does the fuse operate?".

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

One is “what exactly is in a ‘surge protector’ ? ”

Edit 2024–10.

This is where the MOV conducts again, and dissipated the energy.

Here is a simplified AC power diagram.

The third is lightning and “how it gets conducted into a home.”

What is lightning?

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Upvotes:

[old diagram got deleted by accident]

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

These are simplified answers to the original question, and does not change anything I wrote above.

Barnstars:

What does a fuse do?

(Dc diagram shown, AC is similar).